Combi cold room ISO 100 int. dim. 2230 x 2630 & 2230 x 1830 xh 2230 mm (13,08 + 9,1m³)

• Fridge area (also interchangeable with freezer): internal dimensions 2230x2630xh2230 mm (internal volume 13,08m³).
• Freezer area (also interchangeable with fridge): internal dimensions 2230x1830xh2230 mm (internal volume 9,10m³).
• 2 doors, usable width passage 900xh1900 mm (external door can be positioned on 3 sides).
• Door seal fitted with peripheral heating cord (for negative T°).
• 2 vacuum valves (for negative T°).

• Specific chamber with 2 areas for positive or negative temperature, wall, floor and ceiling thickness 100mm, modulation with panels from 200 to 1200mm wide (200+200+200 etc).
• Panels made of non-toxic, anti-scratch white-lacquered galvanised sheet steel.
• High-density injected polyurethane insulation (43kg/m3), environmentally friendly (CFC-free).
• Panels locked by built-in ‘eccentric’ hooks.
• Reinforced floor in 12mm multiplex wood, covered with a ‘honeycomb’ non-slip phenolic resin, withstanding a load of 4000kg/m² (140kg point load).
• Peripheral 90° corners with specific end caps, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
• Partition panel with internal door, fixed to T-shaped corners, also insulated with polyurethane (50kg/m3) to prevent any thermal bridging.
• The corners and edges of the floor, ceiling and walls are all rounded (R15 mm) and also insulated with polyurethane (50kg/m3).
• 100 mm thick hinged door also insulated with polyurethane (43 kg/m3), with right-hand hinges (left-hand hinges available on request: CGC/BF), very sturdy, reinforced with an anodised aluminium perimeter frame, fitted with an EPDM pressure magnetic seal (easy replacement, no tools required), adjustable upward hinges with 100° stop, external handle with key lock, internal lock with safety device.
• Equipment built in compliance with current EC standards.

PLUS :

• Maxicold COMBI EVO, 2 separate chambers in one, space saving, better performance, 100% versatility (each side can be used as a freezer or fridge).
  
  
• A brand new manufacturing concept, with peripheral corners and panels with linear joints, for ease of assembly and the possibility of extension at any time, with an impeccable level of finish.
• The angles and corners are all rounded, with no transfer mouldings - 100% hygiene guaranteed.
• Floor covered in non-slip phenolic ‘honeycomb’ resin.
• All-round door frame in anodised aluminium, for extra protection (through transit of trolleys, ladders, etc).
• Pre-assembly kit for panels supplied as standard, including ceiling support, making assembly safer, easier and quicker.
• On request: modular shelving, strip curtains, trolley ramps (exterior and interior), etc.